The diving watch has a very distinctive sign - the diving bezel. So what is the use of the diving bezel? Topreplicaon - top replica watches online like top replica Patek Philippe watches, Panerai, Omega, Breitling, TAG Heuer, Hublot. Best replica watches fast shipping worldwide.
In 1953, Blancpain introduced the first 50-inch diving watch. The "噚" is a kind of unit that measures the length of the nautical science. The 50-inch is about 91.5 meters, which is the limit of human dive under the air compression technology. All dive watches are equipped with eye-catching luminous hands and scales, in the dark deep sea, coated with fluorescent pointers, scales or surfaces, and deliberately enlarged pointer and scale size, allowing users to read time is easier .
The original dive watch has a drawback. The diving bezel is exposed outside the case. During the dive, there may be fine sand that enters the bezel, causing different degrees of damage to the watch. Thus, the double crown diving watch with the diving bezel placed under the crystal microscope and controlled by the crown was born.
The diving watch also specifically designed the bezel as a one-way counterclockwise rotation, which is closely related to the safety of the diver's life. The reverse rotation design ensures that even if the watch is accidentally touched during the dive, the rotation will only shorten the dive time and ensure the safety of life.
Before the diver officially dive, turn the bezel to align the 12 o'clock time mark with the current time, and then the scale on the bezel aligned according to the minute hand movement is the time taken for the dive.
The minute hand indicates not only the normal time but also the length of the dive. This is crucial for divers, as the oxygen tank capacity of a typical oxygen-carrying dive can only support a dive time of 30 minutes to 50 minutes.
The dive personnel usually have to set aside 15 minutes of floating time to adapt to the pressure change, so the 0-15 minute or 20 minute scale on the rotating bezel of the general diving watch will be enhanced. When the minute hand finishes this section, You have to go back, or you may lose your life.
In 1953, Blancpain introduced the first 50-inch diving watch. The "噚" is a kind of unit that measures the length of the nautical science. The 50-inch is about 91.5 meters, which is the limit of human dive under the air compression technology. All dive watches are equipped with eye-catching luminous hands and scales, in the dark deep sea, coated with fluorescent pointers, scales or surfaces, and deliberately enlarged pointer and scale size, allowing users to read time is easier .
The original dive watch has a drawback. The diving bezel is exposed outside the case. During the dive, there may be fine sand that enters the bezel, causing different degrees of damage to the watch. Thus, the double crown diving watch with the diving bezel placed under the crystal microscope and controlled by the crown was born.
The diving watch also specifically designed the bezel as a one-way counterclockwise rotation, which is closely related to the safety of the diver's life. The reverse rotation design ensures that even if the watch is accidentally touched during the dive, the rotation will only shorten the dive time and ensure the safety of life.
Before the diver officially dive, turn the bezel to align the 12 o'clock time mark with the current time, and then the scale on the bezel aligned according to the minute hand movement is the time taken for the dive.
The minute hand indicates not only the normal time but also the length of the dive. This is crucial for divers, as the oxygen tank capacity of a typical oxygen-carrying dive can only support a dive time of 30 minutes to 50 minutes.
The dive personnel usually have to set aside 15 minutes of floating time to adapt to the pressure change, so the 0-15 minute or 20 minute scale on the rotating bezel of the general diving watch will be enhanced. When the minute hand finishes this section, You have to go back, or you may lose your life.
